Knowing when to hire a professional plumber can save you a lot of cash in the long run. You should contact a licensed plumber when a plumbing problem requires the expertise and skill of a professional. Please remember that you can prevent many serious problems and emergencies by hiring an experienced professional when you have a problem with your plumbing system. Keep reading if you want to find out what kind of problems require the expertise of a professional.

Most good water softener will recommend replacing a gate valve regardless of its condition. The time to discover if it will work is not during a flood in your bathroom. If you have it replaced with a ball valve then check your water heater and laundry valves, too. Have them replaced at the same time with premium ball valves. Ball valve laundry bibbs make it easy to shut off the water to the washer after each use which may help to prevent floods in the future.

When you get to the house stand if front of the toilet and locate the water shut off valve. Should be down below the toilet on the wall. Just turn it off (righty-tighty) completely and flush the toilet. All the water should have left the tank, well at least most of it. If there is remaining water line repair get it out with paper towels or a rag. The important thing is that no more water came in. If it did then your valve is not shut all the way or not working and you need additional help.
 

If you need to add copper pipe make sure that you clean the old and new pipe by using sandpaper, inside and out. If it's not clean the solder will not flow into the joint. Another tip is to not over wrap the mail threaded pipe with tape, this can cause a leak. Twice around should be enough. Also, don't over tighten it.

A plumber becomes a journeyman once they complete their apprenticeship program and they can apply to be licensed. Most of the plumbers today are in the field of journeyman. To get a license to be a journeyman, you need to pass an exam and pay a licensing fee.

Here are some general cautions. Do not begin jobs on holidays, weekends, or at times when plumbers raise their rates or are difficult to reach. Do start early leaving plenty of daylight to call a plumber if something goes wrong. Study the situation carefully. Think about what might happen if something suddenly broke and what the effects would be. Old corroded copper tubing might break in the wall when you are wrenching an angle stop that supplies the water line repair to your toilet. A flood in the wall could be costly. If the angle stop, on the other hand, is new and shuts off easily and you have another toilet in the house then it might make sense to repair the toilet yourself. Be honest, too. Are you handy with tools? Did you do well in shop classes in school?

The way a toilet plunger works is by filling up with water and then pushing that water through the stopped up drain. When unclogging a clogged toilet, the idea is to plunge up and down a couple of times so the plunger fills with water and then jam the open end, sometimes called a force cone, into the waste outlet in the plugged toilet and start plunging. You may have to pump the plunger up and down several times to clear the blockage.

The plumber you hire does not normally do heating but will do hot water heating or in floor heating in the house. Some places you can use the water heater for both domestic hot water and for in floor heating if the heating is a secondary heat. Check with your local plumbing codes on this to be clear.